ISO / T 2407 : 1981 Wire Testing Equipment ZY6070 Hot Rod Method Plastic

ISO / T 2407 : 1981 Wire Testing Equipment ZY6070 Hot Rod Method Plastic

Scope of application:

Suitable for the determination of plastic combustion performance test with hot rod.

Meet the standard:

Consistent with GB/T 2407-2008: determination of combustion characteristics of plastic hard plastic samples with hot rod contact and ISO/T 2407:1981 test standard.

Main parameters:

The test chamber volume: 1 m з. Material: for baking paint (or stainless steel), with ventilation and observation window.

Fixture: an upright bracket mounted on a sliding pedestal can be tested for different lengths of specimens.

Ignition source: hot rod with metal contact, 8mm in diameter and 100mm in length; Heated to 955 ℃ + 15 ℃; Insulation bracket: using asbestos, two fixed hot rod to ensure that the hot rod can be separated from sample when necessary.

Balancer: a force of about 003N applied to the contact of the hot rod and the test sample.

Sample screw: the hot rod can be kept in contact with the test sample until the sample is burned at about 5mm.

Positioning bar: 8mm in diameter and 150mm in length. Replace the hot rod to adjust the sample position.

The apparatus for testing hot rod temperature is stopwatch.

lan cable tester

electrical wire tester

ISO / T 2407 : 1981 Wire Testing Equipment ZY6070 Hot Rod Method Plastic Images